Powerjump Technologies Australasia
stay up to date
  • home
  • zuken solutions
    • CR-8000 >
      • CR-8000 System Planner
      • CR-8000 Design Gateway
      • CR-8000 Design Force >
        • CR-8000 RF Design
      • CR-8000 DFM Center
      • CR-8000 Graphical Pin Manager
    • CR-5000 >
      • CR-5000 System Design
      • CR-5000 Physical Design
      • CR-5000 Analysis & Verification
      • CR-5000 Manufacturing
      • CR-5000 Data Management
    • CADSTAR >
      • CADSTAR System Design
      • CADSTAR Physical Design
      • CADSTAR Analysis & Verification
      • CADSTAR Manufacturing
      • CADSTAR Migration Tool
    • E³.series >
      • E³.series System Design
      • E³.series Physical Design
      • E³.series Analysis & Verification
      • E³.series Manufacturing Process
      • E³.series Revision Management
      • E³.series Data Management
      • E³.series Interfaces
    • E³.WireWorks >
      • E³.schematic
      • E³.cable
      • E³.panel
    • DS-2 >
      • DS-2 EPS
      • DS-2 Version & Revision Management
      • DS-2 Change Management
      • DS-2 History Management
      • DS-2 Analysis & Verification
      • DS-2 3rd Party Integration
  • powerjump engineering resources
  • information download
  • support
  • contact us



PCB Design

Electrical & Wire Harness Design

Library & Data Management
DS-2
     Engineering Data
     Management

     Platform Suite
     (EPS)
     Version & Revision
     Management
     Change
     Management
     History
     Management
     Analysis &
     Verification
     3rd Party Integration

DS-2 Change Management

DS-2
Growth, cost reduction, new technologies, domestic competition, specification changes due to customer requests and quality improvement, were the top six drivers of change in Zuken’s customer base surveyed over the past years.

Change Management support across the engineering process enables users  to communicate individually with  related teams, projects, designs, components or even  across disciplines. It closes the loop on workflows by automatically notifying the relevant people, technologists or change groups and then provides them with acknowledgement and confirmation of the receipt of changes.

To support this change management workflow, the new process directly notifies all persons/groups directly or indirectly impacted of product changes and discontinuations, so the information can be promptly passed on to initiate action. Ultimately, this change management solution helps to significantly reduce cycle times and lessen chances of missing change notices.

Customers who implemented Zuken’s change management solution achieved a prompt notification of all product changes and scheduled product retirements so they will experience fewer problems during their design and purchasing stages, fewer 'line down' delays during their manufacturing stage and faster time-to-market schedules for their products.


DS-2 component change manager
Component Change Management
Zuken’s component change management solution automatically notifies the relevant people/groups of component changes. It will then proceed to provide the user performing the component change with an acknowledgment and confirmation of the receipt of component changes by the parties involved.

DS-2 library change manager
Library Change Management
Zuken’s library change management solution provides you with support across the library engineering process, enabling you to communicate individually with each related library team, library project and library qualification / certification or even across library disciplines. It closes the loop on library workflows by automatically notifying the relevant people / groups of library changes.

DS-2 BOM change manager
BOM Change Management
Zuken’s change management solution provides you with support across the engineering process, enabling you to communicate individually with each related BOM connected to teams or individuals across disciplines. It closes the loop on library workflows by automatically notifying the relevant people/groups of BOM changes, and then proceed to provide the user performing the change with an acknowledgment and confirmation of the receipt of changes by the parties involved.

DS-2 design data
Design Data Change Management
Zuken’s design data change management solution provides support across the engineering process, enabling you to communicate individually with each related team, project and design department or even across design discipline. It closes the loop on design data workflow by automatically notifying the relevant people/groups of design data changes. It will then proceed to provide the user performing the change with an acknowledgment and confirmation of the receipt of data changes by the parties involved.

DS-2 obsolescence analysis
Obsolescence Management / Analysis
Zuken’s obsolescence management solution provides support across the engineering process, enabling you to communicate individually with each related team, project and design department or even across design discipline.

Zuken Logo

Where to Buy

Obtain the contact details for your local Powerjump office
Where to Buy

Questions?

Can't find the answer to your question?
Submit your questions and we will get back to you.
Contact Us

DS-2 Downloads

DS-2 Product Brochure
[PDF, 1.0Mb]
Download

Site Map

 Home
 Zuken Solutions
 Powerjump Engineering Resources
 Information Download
 Support
 Contact Us

Useful Links

 Zuken Global Support
 A-Z of Zuken PCB Products
 A-Z of Zuken Electrical Design
 Products

Contact Us

 Suite 7   |   1949 Malvern Road
 Malvern East  3145   |   Victoria
 Australia
 Tel: 1300 655 330
 enquiries@powerjumptechnologies.com.au
Powerjump Logo
Copyright 2013   |   webmaster@powerjumptechnologies.com.au   |   7 / 1949 Malvern Rd, Malvern East VIC 3145   |   1300 655 330